Accessories, Oscillating mirror models – Datalogic Scanning DS8100A User Manual
Page 4
DS8100A QUICK GUIDE
4
Accessories:
NAME Description
Part
Number
PWR-120
J-box power unit 110/230 VAC 24 V 120 W
93ACC1530
PWR-240
J-box power unit 110/230 VAC 24 V 240 W
93ACC1070
PWR-480
J-box power unit 110/230 VAC 24 V 480 W
93ACC1080
BTK-8100
Bus terminator kit (5 pcs)
93ACC1090
BTK-8102
Double terminator kit (2 pcs)
93A051287
FBK-8100
Fast bracket kit (2 pcs)
93ACC1130
US-8100
Bracket kit (10 pcs)
93ACC1140
US-BOX
C-BOX Mounting Bracket to station frame (10 pcs)
93ACC1777
PLL-8000
Optocoupled PLL device
93ACC1280
ACS-81
Air cleaning system
93ACC1430
DF-81
Dust filter (10 pcs)
93ACC1440
FS-1
Frame shaper (8 pcs)
93ACC1750
CAB-8100
10 wire shielded cable D 9.5 mm – 50 m
93ACC1120
CAB-8101 17-pin
scanner/scanner
connection cable 1.2 m
93A051020
CAB-8102 17-pin
scanner/scanner
connection cable 2.5 m
93A051030
CAB-8105 17-pin
scanner/scanner
connection cable 5 m
93A051040
CAB-8305
Power and bus return cable (last Slave) 5 m
93A051268
CAB-8310
Power and bus return cable (last Slave) 10 m
93A051336
CAB-8402
No power cable 2.5 m
93ACC1758
CAB-8405
No power cable 5 m
93ACC1759
CAB-6011
26-pin scanner to C-BOX 100 1 m
93A051221
CAB-6012
26-pin scanner to C-BOX 100 2 m
93A051222
CAB-6015
26-pin scanner to C-BOX 100 5 m
93A051223
CAB-6502
Fam 6K-8K cross cable 2.5 m
93A051288
CAB-6505
Fam 6K-8K cross cable 5 m
93A051289
CAB-8605
Power and Lonworks termination cable (Master) 5 m
93A051290
Sentinel-5
Supervisor (up to 5 arrays)
93A101004
Sentinel-10
Supervisor (up to 10 arrays)
93A101005
Sentinel-32
Supervisor (up to 32 arrays)
93A101007
C-BOX 100
Passive Connection Box
93ACC1510
MEP-542
Photocell kit - PNP
93ACC1727
MEP-543
Photocell kit - NPN
93ACC1728
OEK-2
Optical encoder (10 m cable + spring)
93ACC1770
OEK-1
Optical encoder kit + 10 m cable
93ACC1600
GFC-80 90°
mirror
93A251020
GFC-800
90° mirror close distance
93A201103
Oscillating Mirror Models
Oscillating mirror models are used when coverage of a large reading area is required, mainly in picket fence
applications.
The oscillating mirror is placed in front of the reading aperture of the DS8100A scanner to deflect the laser beam.
As the mirror moves, this sweeping function of the laser beam allows the coverage of a larger area to locate the
barcodes.
The aperture angle is symmetrical and the scan line perpendicular to the scanner is at 0° as shown in the figure
below.
0°
+25°
-25°