AMETEK SLM Series Rev B - Manual (Page 26)

Installation SLM-Series AC/DC Load
2-4 M540072-01 Rev B
2.3.2 Voltage Sensing Input (Vsense) BNC Connector.
To solve the conductor voltage drop under a big load current, Vsense-CLIP cable
can be used to connect with the specific point to be measured thus obtaining the
specific voltage value. See Figure 2-2 and Figure 2-3.
Figure 2-2 Connection Method for Small Load Current Condition
Figure 2-3 Typical Connection for SLM-Series AC/DC Electronic Load
2.3.3 RS-232C and GPIB Connections
For these connections, refer to the SL-series mainframe operation manual(s).
RS-232 and GPIB programming operation are addressed in Section 4 of this manual.
2.4 MAINTENANCE
WARNING: Avoid electrical shock or damage to the meter.
To avoid electrical shock or damage to the meter, do not get water inside
the case.
Periodically wipe the case with a damp cloth and detergent; do not use abrasives or
solvents.