4 jumpers setting and connectors – Aplex Technology ARCHMI-912 User Manual
Page 27
ARCHMI-9XX Series User Manual
26
2.4 Jumpers Setting and Connectors
1. CPU1:
(FCBGA1168) onboard Intel Haswell-U Processors.
Model
Processor
Number
PBF
Cores/Threads TDP
Remarks
SBC-7110-i34010-4G
I3-4010U
1.7GHz
2 / 4
15W
SBC-7110-i34010P-4G
i3-4010U
1.7GHz
2 / 4
15W
Option
SBC-7110-i54310-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-7110-i54310P-4G
i5-4310U
2.0 up to 3.0GHz
2 / 4
15W
Option
SBC-7110-i74510-4G
i7-4510U
2.0 up to 3.1GHz
2 / 4
15W
Option
SBC-7110-i74510P-4G
I7-4510U
2.0 up to 3.1GHz
2 / 4
15W
option
2. H3/H4/H5/H6 (option):
CPU1 Heat Sink Screw holes, four screw holes for intel Haswell-U Processors
Heat Sink assemble.
3. FAN1 (option):
(2.54mm Pitch 1x3 Pin Header), Fan connector, cooling fans can be connected
directly for use. You may set the rotation condition of cooling fan in menu of
BIOS CMOS Setup.
Pin#
Signal Name
1
Ground
2
VCC
3
Rotation detection
Note:
Output power of cooling fan must be limited under 5W.
4. U2/U3/U4/U5/U7/U8/U9/U10:
(FBGA96) onboard DDR3L Memory.