Aplex Technology ARCHMI-912 - Manual (Page 50)

ARCHMI-9XX Series User Manual 49
NC 3 4 SMB_DATA_R
SMB_CLK_R 5 6 PCH-GPIO56
PCH-GPIO57 7 8 PCH-GPIO59
PCH-GPIO58 9 10 +5V
USB23(SBC-7110 USB3/USB4)：
(Double stack USB type A), Rear USB connector, it provides up to 2 USB2.0
ports, speed up to 480Mb/s.
USB_23（option）：
(2.0mm Pitch 2x5 Pin Header), Front USB connector, it provides one USB port
via a dedicated USB cable, speed up to 480Mb/s.
Signal Name Pin# Pin# Signal Name
5V_USB23 1 2 5V_USB23
USB4_N 3 4 USB3_N
USB4_P 5 6 USB3_P
Ground 7 8 Ground
NC 9 10 Ground
Note:
Before connection, make sure that pinout of the USB Cable is in accordance
with that of the said tables. Any inconformity may cause system down and
even hardware damages.
JP5：
(2.0mm Pitch 2x3 Pin Header), COM3 setting jumper, pin 1~6 are used to select
signal out of pin 9 of COM3 port.
JP5 Pin# Function
Close 1-2 RI (Ring Indicator) (default)
Close 3-4 COM3 Pin9: +5V (option)
Close 5-6 COM3 Pin9: +12V (option)