ART Pro Audio SGX Series - Guitar Effectss Processor - Manual (Page 51)

47
APPENDIX B
EXAMPLES
COPYING A PRESET
You may copy a preset from any location into another easily. (If you want to copy
a factory preset into another factory preset location, you must first Unlock the
destination preset.) To copy a factory preset into one of the 90 user presets
follow these steps.
-Enter EDIT Mode.
-Select the preset you want copied by pressing the Preset button and using the
Encoder to dial it up.
-Press the RECALL button.
-Use the Encoder to select the preset location you are copying to i.e. Preset
111.
-Press the STORE button.
*The preset has now been copied and stored to the new location.
FACTORY RESET
There is a Factory Reset sequence which will reinitialize the SGX 2000 to ALL of
its original values. Be sure that you have either downloaded or kept a written
record of the Presets you want saved since they will be eliminated. To perform a
Factory Reset you must press and hold the PRESET, 0/ENTER and 4/MIDI buttons
simultaneously.
EXAMPLE 1:
Editing the MPT from the SGX 2000 front panel controls.
In this example, we will edit the MPT so when MIDI numbers 1 and 2 are received,
SGX 2000 PRESETS 60 and 151 will be recalled. It is assumed that the SGX 2000's
MPT has not been edited.
-Make sure you are in the EDIT Mode. (Press EDIT button if not)
-Press the MIDI button.
-Press the Param button.
-Turn the Encoder until you see in the LCD:
MIDI PROG= 0 > MIDI PROG= 0
PRESET= 1_ > PRESET= 60_
-Press the Value button and use the Encoder to change the number to 60.
-Press the param button twice, press the Value button and turn the Encoder 1
click.
-Press the Value button twice and use the Encoder to change the number to 151.
MIDI PROG= 1 > MIDI PROG= 1
PRESET= 2_ > PRESET= 151_
-Exit MIDI mode by pressing the MIDI button once.
You may assign any preset # to any program # including a preset to a multiple of
program #'s. To test the reassigned numbers, use a MIDI device to recall the
presets. Your reassigned presets should be recalled.