Artesyn ATCA 7370 / ATCA 7370-S Installation and Use (January 2015) - Manual (Page 94)

BIOS
ATCA-7370/ATCA-7370-S Installation and Use (6806800P54H) 94
4.2.2.3 Peripheral Configuration
The table below lists the Peripheral Configuration options.
4.2.2.4 HDD Configuration
The table below lists the HDD Configuration options.
C-States Enable processor idle power saving states (C-States). Options: Disabled
and Enabled.
Default is Enabled.
Table 4-9 Processor Configuration (continued)
Field Description
Table 4-10 Peripheral Configuration
Field Description
Spread Spectrum Clock Enable/Disable Spread Spectrum.
Options: Disabled and Enabled.
Default is Enabled.
RTM power policy Select RTM power policy. Disable for RTM as an independent FRU, or
enable for RTM Activate/Deactivate with front board.
Options: Disabled and Enabled.
Default is Disabled.
Table 4-11 HDD Configuration
Field Description
SATA Interface Combination Select the SATA controllers operation mode.
Options: IDE and AHCI.
Default is AHCI.
Serial ATA Port 0 / Hard Disk 0 Displays the identity of the device attached.
Serial ATA Port 1 / Hard Disk 1
Serial ATA Port 2 / Hard Disk 2
SAS HDD 1