Artesyn Centellis 4410 (AXP-1410) Installation and Use (July 2014) - Manual (Page 142)

Supported IPMI Commands
AXP 1410 Installation and Use (6806800H70L) 142
6.2.3 Sensor Device Commands
The IPMC supports the following sensor device commands.
6.2.4 FRU Device Commands
The IPMC supports the following FRU device commands.
Table 6-3 Supported Sensor Device Commands
Command NetFn Rq/Rs CMD PEMs FTMs
Get Device SDR Info 0x04/0x05 0x20 X X
Get Device SDR 0x04/0x05 0x21 X X
Reserve Device SDR Repository 0x04/0x05 0x22 X X
Get Sensor Reading Factors 0x04/0x05 0x23 X X
Set Sensor Hysteresis 0x04/0x05 0x24 X X
Get Sensor Hysteresis 0x04/0x05 0x25 X X
Set Sensor Threshold 0x04/0x05 0x26 X X
Get Sensor Threshold 0x04/0x05 0x27 X X
Set Sensor Event Enable 0x04/0x05 0x28 X X
Get Sensor Event Enable 0x04/0x05 0x29 X X
Get Sensor Event Status 0x04/0x05 0x2b X X
Get Sensor Reading 0x04/0x05 0x2d X X
Get Sensor Type 0x04/0x05 0x2f X X
Table 6-4 Supported FRU Commands
Command NetFn Rq/Rs CMD PEMs FTMs
Get FRU Inventory Area Info 0x0A/0x0B 0x10 X X
Read FRU Data 0x0A/0x0B 0x11 X X
Write FRU Data 0x0A/0x0B 0x12 X X