Artesyn COMX-P40x0 ENP2 Installation and Use (January 2015) - Manual (Page 98)

BSP
COMX-P40x0 ENP2 Installation and Use (6806800R95C) 98
7.6.2 Network Variables
This table lists example network u-boot environment variables to establish a network
connection. By default, the factory sets up 10 MAC addresses in the ID EEPROM and u-boot will
establish corresponding "ethXaddr" variables automatically.
7.6.3 Filename Variables for BSP Components
Network Variables
setenv ipaddr 192.168.0.91
setenv netmask 255.255.255.0
setenv gatewayip 192.168.0.1
setenv serverip 192.168.0.100
Filename Variables for BSP Components
setenv rcwfile comx_p4080/COMX_P4080_V100R00/rcw.bin
setenv fmanfile comx_p4080/COMX_P4080_V100R00/fsl_fman_u-
code_P4080_101_6.bin
setenv bootfile comx_p4080/COMX_P4080_V100R00/uImage
setenv norfsfile comx_p4080/COMX_P4080_V100R00/rootfs_ext2.img
setenv fdtfile comx_p4080/COMX_P4080_V100R00/comx.dtb
setenv ubootfile comx_p4080/COMX_P4080_V100R00/u-boot.bin
setenv nandfsfile comx_p4080/COMX_P4080_V100R00/rootfs_jffs2.nand
setenv rootpath /tftpboot/comx_p4080/rootfs_nfs