Artesyn MVME3100 Single Board Computer Installation and Use (June 2014) - Manual (Page 22)

Hardware Preparation and Installation
MVME3100 Single Board Computer Installation and Use (6806800M28E) 22
1.2.2 Unpacking Guidelines
Unpack the equipment from the shipping carton. Refer to the packing list and verify that all
items are present. Save the packing material for storing and reshipping of equipment.
If the shipping carton is damaged upon receipt, request that the carrier’s agent be present
during the unpacking and inspection of the equipment.
Connect any other equipment you will be using Connecting to Peripherals on page 32
Verify the hardware is installed. Completing the Installation on page 34
Table 1-1 Startup Overview (continued)
What you need to do... Refer to...
Damage of Circuits
 Electrostatic discharge and incorrect installation and removal of the product can
damage circuits or shorten their life.
 Before touching the product make sure that your are working in an ESD-safe
environment or wear an ESD wrist strap or ESD shoes. Hold the product by its edges and
do not touch any components or circuits.