Artesyn MVME51005E SBC Installation and Use (July 2014) - Manual (Page 130)

Specifications
MVME51005E Single Board Computer Installation and Use (6806800A38D) 132
A.2 Power Requirements
Power requirements for the MVME5100 Single Board Computer depend on the configuration
of the board. The table below lists the typical and maximum power consumption of the board
using an MVME761 Transition Module.
Note: The power requirements for the MVME5100 include the power requirements for a PMC
or IMPC Modules. The PMC specification allows for 7.5 watts per PMC slot. The 15 watts total
can be drawn from any combination of the three voltage sources provided by the MVME5100:
+5V, +12V and -12V.
A.3 Cooling Requirements
Refer to Chapter C, Thermal Analysis , for more information.
Table A-2 Power Consumption
Model +5V +/-5% +12V +/-10% -12V +/-10%
MVME5100 3.8A max
3.0A typ. 8.0 mA typ. 2.0 mA typ.
MVME5106 3.8A max
2.6A typ 8.0 mA typ 2.0 mA typ.
MVME5107 4.7 A max.
3.5 A typ. 8.0 mA typ 2.0 mA typ
MVME5110-21xx 3.8 A max.
3.1 A typ.
8.0 mA typ. 2.0 mA typ
MVME5110-22xx 4.7 A max.
3.5 A typ.
8.0 mA typ. 2.0 mA typ.