Table 3-2, Diagnostic test groups, Ppcbug firmware – Artesyn MVME51005E SBC Installation and Use (July 2014) User Manual
Page 64

PPCBug Firmware
MVME51005E Single Board Computer Installation and Use (6806800A38D)
66
Note:
1. You may enter command names in either uppercase or lowercase.
2. Some diagnostics depend on restart defaults that are set up only in a particular restart
mode. Refer to the documentation on a particular diagnostic for the correct mode.
3. Test Sets marked with an asterisk (*) are not available on the MVME5100 (unless an
IPMC712 or IPMC761 is mounted). The ISABRDGE test is only performed if an IPMC761 is
mounted on the MVME5100. If the MVME5100 is operating in PMC mode (IPMC761 is not
mounted), then the test suite is bypassed.
Table 3-2 Diagnostic Test Groups
Test Group
Description
EPIC
EPIC Timers Test
PHB
PCI Bridge Revision Test
RAM
RAM Tests (various)
HOSTDMA
DMA Transfer Test
RTC
MK48Txx Real Time Clock Tests
UART
Serial Input/Output Tests (Register, IRQ, Baud, & Loopback)
Z8536
Z8536 Counter/Timer Tests*
SCC
Serial Communications Controller (Z85C230) Tests*
PAR8730x
Parallel Interface (PC8730x) Test*
KBD8730x
PC8730x Keyboard/Mouse Tests*
ISABRDGE
PCI/ISA Bridge Tests (Register Access & IRQ)
VME3
VME3 Tests (Register Read & Register Walking Bit)
DEC
DEC21x43 Ethernet Controller Tests
CL1283
Parallel Interface (CL1283) Tests*