Artesyn MVME7616E Transition Module Installation and Use (April 2015) - Manual (Page 43)

Connector Pin Assignments
MVME7616E Transition Module Installation and Use (6806800A43D) 43
4.3 Asynchronous Serial Port Connectors (J5/J6)
The interface for the asynchronous serial ports, COM1 and COM2, is provided with two
standard DB9 connectors, J5 and J6. The connector shields for these ports are tied to chassis
ground. The pin assignments and signal mnemonics for these connectors are listed in
Table
4-2 .
4.4 Asynchronous/Synchronous serial Port
connectors (J7/J8)
The interface for the asynchronous/synchronous serial ports 3 and 4 is provided by two HD-26
connectors, J7 and J8. The connector shields for these ports are tied to chassis ground.
The pin assignments and signal mnemonics for serial ports 3 and 4 are listed in the following
tables.
Table 4-2 COM1 and COM2 Pin Assignments
Pin Signal
1 DCD
2 RXD
3 TXD
4 DTR
5 GND
6 DSR
7 RTS
8 CTS
9 RI
Table 4-3 Serial Port 3 Pin Assignments
Pin Signal Pin Signal
1 No Connect 14 SP3_P14
2 TXD3 15 TXCI3