Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 25)

Chapter 2
VXS1-RTM1 Installation and Use (6806800P46C) 25
Hardware Preparation and Installation
This chapter describes the preparation before installing the RTM, the applicable environmental
and power requirements, and the actual installation and removal of the RTM.
2.1 Unpacking and Inspecting the RTM
Read all notices and cautions prior to unpacking the product.
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment:
 VXS1-RTM1

One printed copy of Quick Start Guide

One printed copy of Safety Notes Summary

Any other items ordered
Damage of Circuits
 Electrostatic discharge and incorrect installation and removal of the blade can damage
circuits or shorten its life.
 Before touching the blade or electronic components, make sure that you are working in
an ESD-safe environment.