Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 33)

Controls, LEDs, and Connectors
VXS1-RTM1 Installation and Use (6806800P46C) 33
3.1.2 Connectors
This section describes the pin assignments and signals for the connectors on the RTM.
3.1.2.1 Connector Definitions
The following table lists the connectors located on the RTM.
Table 3-2 RTM Connectors
Reference
Designator
Function Pinout Definition Description
RP0 VXS Backplane RP0 Custom High speed connector
RP2 VME Backplane RP2 VITA 1 VME / User I/O connector
P1 Reset Planar connector for
recessed switch on front
panel
P2 CPLD Programmer and
I2C debug Ten pins planar header for
CPLD programming and
I2C debugging
P3 Serial Port Ten pins planar header
connector for Serial Port 3
P4 Serial Port Ten pins planar header
connector for Serial Port 4
P5 GPIO Eight pins planar header
connector for GPIO lines
J1 Mini Display VESA VESA mini display
connector on front panel
J2 Serial Port DTE Mini DB9 serial port 2
connector on front panel
J3 Serial Port DTE Mini DB9 serial port 1
connector on front panel
J4 USB Dual stacked USB3.0
connector for USB 1 and 2
on front panel