Artesyn MVME8100 RTM (VXS1-RTM1) Installation and Use (April 2015) - Manual (Page 36)

Controls, LEDs, and Connectors
VXS1-RTM1 Installation and Use (6806800P46C) 36
3.1.2.2.2 VME RP2 Connector
The 32 pins in each row connector is defined by VME standard. This connector is used to
connect PMC I/Os, COM ports, USB2.0 and other I/O signals. The pin assignment is shown in
the table below:
Table 3-4 RP2 Pin Assignment
1st Row 2nd Row 3rd Row 4th Row 5th Row
Pin
Name Signal Name Pin
Name Signal
Name Pin
Name Signal Name Pin
Name Signal Name Pin
Name Signal
Name
A1 PMC_IO<2> B1 +5V C1 PMC_IO<1> D1 DPC_BP_AUX
_P Z1 GIGE1_TR
D0_P
A2 PMC_IO<4> B2 GND C2 PMC_IO<3> D2 DPC_BP_AUX
_N Z2 GND
A3 PMC_IO<6> B3 NC C3 PMC_IO<5> D3 GND Z3 GIGE1_TR
D0_N
A4 PMC_IO<8> B4 NC C4 PMC_IO<7> D4 USB1_P Z4 GND
A5 PMC_IO<10> B5 NC C5 PMC_IO<9> D5 USB1_N Z5 GIGE1_TR
D1_P
A6 PMC_IO<12> B6 NC C6 PMC_IO<11
> D6 GND Z6 GND
A7 PMC_IO<14> B7 NC C7 PMC_IO<13
> D7 USB2_DBG_P Z7 GIGE1_TR
D1_N
A8 PMC_IO<16> B8 NC C8 PMC_IO<15
> D8 USB2_DBG_N Z8 GND
A9 PMC_IO<18> B9 NC C9 PMC_IO<17
> D9 RTM_SIO Z9 GIGE1_TR
D2_P
A10 PMC_IO<20> B10 NC C10 PMC_IO<19
> D10 RTM_RST_L Z10 GND
A11 PMC_IO<22> B11 NC C11 PMC_IO<21
> D11 BP_GPIO2 Z11 GIGE1_TR
D2_N
A12 PMC_IO<24> B12 GND C12 PMC_IO<23
> D12 BP_GPIO3 Z12 GND
A13 PMC_IO<26> B13 +5V C13 PMC_IO<25
> D13 I2C_SDA Z13 GIGE1_TR
D3_P