Artesyn SAM1411 Installation and Use (September 2014) - Manual (Page 53)

Shelf Manager File System
SAM1411 Installation and Use (6806800M91B) 53
5.2 Log Files
There are three types of log files:
1. Linux log files
2. HPI log file (see System Management Interface Based on HPI-B (Centellis CO 31kX/4100/2000)
User’s Guide, chapter HPI Logging Support)
3. Supervisor log file
By default, the log file for supervisor logging is located at /var/log/supervisor.log.
You have the possibility to configure the supervisor logging by changing the configuration file
located at /usr/etc/supervisor/config/sv_config.xml. This XML file allows you to
change the following elements:
Element Description Possible Values
LogSeverity mask Defines what information
will be logged Silent|Trace|Info|Notice|Warning|Error|Critical
|Alert|Emergency|Everything
LogSink mask Defines where the
information will be
logged Stdout|Stderr|Logfile|Syslog
LogFile name Location of the logfile Default: /var/log/supervisor.log
LogFile size Maximum logfile size Default: 500 KB
The IP addresses in the log file are dynamic. Only change the elements listed in the table
above.