Avalon Firestyles 864 TRV GS2 Installation - Manual (Page 70)

70 Optional Equipment
(for qualified installers only)
Travis Industries 4140611 100-01385
8. Disconnect the following:
Power (3 wires) Main harness
On/Off wires
Pilot connections (slide silicone tubing up)
9. Remove and place aside the base IFC (it may be kept for spare parts).
10. Remove and place aside the On/Off‐Comfort Control‐Battery Plate with harness (the batteries and
assembly may be kept for spare parts).
11. Remove and discard the screws (see “a” below) holding the stock regulator in place (see “b”
below). Remove and discard the stock regulator, spring, and gasket (see “c” below).
a
T-20 Torx or
Slotted Screwdriver
b
c
d