Avalon Firestyles 864 TRV GS2 Installation - Manual (Page 71)

Optional Equipment
(for qualified installers only)
71
Travis Industries 4140611 100-01385
12. The stepper motor (adjustable regulator) has an installation sheet included with it – make sure to
follow all of the directions. Place the stepper motor on the gas control valve (see below) – MAKE
SURE IT IS CORRECTLY ORIENTED. Secure using the screws included with the motor – tighten to
25 Lb‐inches. Leak‐test this area after installation to verify proper installation. Route the stepper
motor wire near the IFC location.