Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 10)

S h i p p i n g t h e P r i n t e r
If you need to ship the printer to a different location:
1. Remove the ribbon roll, if one is loaded.
2. Remove the supply roll, if one is loaded.
3. Close the printhead by pressing down on the thumb well until
you hear it click into place.
4. Place the printer in the original box and secure with
packaging material. Make sure the printer is adequately
packed to avoid damage during shipment. See Appendix
B, "Accessories and Options" for the packaging materials part
numbers.
9 4 4 5  P r i n t e r O n l i n e E m u l a t i o n
The 9860 printer using 203 dpi (dots per inch) printing supports
94x5 emulation. You can send 94x5 data streams to this printer.
Refer to your 9445 Programmer’s Manual for information about
94x5 data streams.
Thumb Well
1-2 Getting Started