Avery Dennison Monarch 9860 Operator Handbook - Manual (Page 84)

E n a b l i n g a S c r i p t
The script must be enabled before you can use it.
To enable or disable a script:
1. From the Script Menu, press l or r until you see
SCRIPTS
l
Enable Script
r
2. Press N.
Enable Script?
l
Yes
3. Use l or r to select either "Yes" or "No" and press N.
Selecting "Yes" starts the script. Selecting "No" stops the
script. If you select "Yes," when you turn off the printer and
turn it back on, the script automatically starts.
Once the script is enabled, you will see
Print Mode
S Ready
The "S" in the lower left-hand corner of the screen indicates
the printer has a script loaded and enabled (the script is
running).
10-4 Using Scripts