Avery Dennison Monarch 9860 Operator Handbook User Manual

Page 93

Advertising
background image

O f f l i n e P r i n t i n g

Refer to the keyboard’s Operating Instructions for more
information about offline printing and batch entry.

S p e c i a l P r i n t i n g C o n s i d e r a t i o n s

Keep in mind the following special printing considerations.

Maximum

Print Speed

Printing Method

Printhead

Density

Knife

2.5/4.0/6.0
ips (inches
per second)

Thermal Direct
Thermal Transfer

203/300 dpi
dots per inch

Supported

8.0 ips

Thermal Direct
Thermal Transfer

203/300 dpi

Supported

◆

94x5 emulation is not supported using 300 dpi.

◆

The maximum supply and image length with the optional 300
dpi printhead is 12.0 inches (305 mm).

◆

The recommended minimum cut feed length is 1.5 inches
(38 mm).

◆

You may need to clean the printhead and platen roller more
frequently when printing at high speeds. See Chapter 4,
"Care and Maintenance," for more information.

P r i n t i n g Tr u e Ty p e ® F o n t s

TrueType® fonts are available on this printer. TrueType fonts are
scalable and the characters print smoothly, without the jagged
edges you see on bitmap fonts. When downloading a TrueType
font, you download the entire font. You cannot specify a subset
(particular characters or point size) of the font.

Printing

11-7

Advertising
This manual is related to the following products: