Avery Dennison Monarch 9860 Operator Handbook User Manual

Page 46

Advertising
background image

P o s i t i o n i n g

This menu includes selections to change the print, supply, margin,
cut, and dispense positions along with the backfeed distance.

When you see

Enter print pos
[-99/99]: +0

Feed (

F) acts as a toggle switch to change the value by 10 or 1.

For example, to make the print position 23 (from the default of 0),
press

F, then press r twice (20), press

F again and press r

three times (23).

P r i n t P o s i t i o n

This function adjusts where data prints vertically on the supply.
Adjust the print if it is too close to the top or bottom of the supply,
or overtypes the pre-printed area. One dot is 0.0049 inch.

◆

If the data is too close to the bottom, increase the number.

◆

If the data is too close to the top, decrease the number.

Changing this setting only affects new

formats sent to the printer.

6-8 Setting Supply Options

Advertising
This manual is related to the following products: