Avery Dennison SS Finisher - Manual (Page 25)

Users Manual SS Finisher Trouble Shooting •••• 25
Control Panel Operation
SS Finisher Controls
COUNTER 999999 STOPPED
LEN:XXXmm CUT: SPD:
Start
- Starts the SS Finisher
- ON LINE light must be GREEN
(SS Finisher waiting for material to cut)
Feed
- FEED and START must both be used
- Feed will stop when the buttons are released
- Stock moves through in one continuous strip
- Stock moves through without cutting
Knife
- KNIFE and START must both be used
- Knife movement will stop when the buttons are released
- The upper knife will move slowly towards the horn face. Machine
will make a ticking sound.
- Allows the operator to visually see the gap between the knife and
the horn face. – Make rough knife leveling adjustments.
Stop
- The stop button will stop the cutter at the end of the current label
being sensed.