Paxar Monarch 9855 RFID Printer - Manual (Page 87)

S p e c i a l P r i n t i n g C o n s i d e r a t i o n s
Keep in mind the following special printing considerations.
Maximum Print Speed Printing Method Printhead
Density
Peel Mode
2.5/4.0/6.0 ips
(inches per second) Thermal Direct
Thermal Transfer 203/300 dpi
dots per inch Supported
8.0 ips Thermal Direct
Thermal Transfer 203/300 dpi Supported
10.0 ips Thermal Direct
Thermal Transfer 203 dpi only Not Supported
◆ 94x5 emulation is not supported using 300 dpi.
P r i n t i n g Tr u e Ty p e ® F o n t s
TrueType® fonts are available on this printer. TrueType fonts are
scalable and the characters print smoothly, without the jagged
edges you see on bitmap fonts. When downloading a TrueType
font, you download the entire font. You cannot specify a subset
(particular characters or point size) of the font.
These font files may be very large and image
slower than bitmap fonts. The size of the font
file, in bytes, is the minimum amount of
memory you must have available for fonts in
the printer’s memory.
Your System Administrator may need to reconfigure the printer’s
memory to use downloaded TrueType fonts. Refer to the optional
Packet Reference Manual (available on our Web site) to learn
how to reconfigure the printer’s memory. After reconfiguring
memory, resend the font, format, and batch packets.
Printing 8-9