Stitch length, Differential feed – Baby Lock Cover Stitch (BLCS-2) Instruction and Reference Guide User Manual

Page 13

Advertising
background image

The stitch length adjusting dial is conve­
niently located just to the left of the front
cover, near the base plate (fig. A). The
dial shows the stitch­length ranging from
1, for the shortest stitch, to 4 for the
longest.
Simply turn the dial aligning the desired
setting with the indicator mark on the

machine. A stitch length of 3mm, or about 10 stitches per inch is ideal for most fabrics. For seaming
very light weight fabrics, you may prefer a shorter stitch length. When sewing heavier fabrics, you may
choose to lengthen the stitch (fig. B).

O

V
E

R

V

I

E

W

11

Stitch Length

A

B

Differential Feed

Your Baby Lock Cover Stitch is equipped with differential feed.The
set of feed dogs work independently in order to ensure smooth
sewing on all fabrics (fig. A)

When the differential feed adjusting lever, located at the machine's
right, front edge is set on "N" for normal feeding, the feed dogs move
the same distance. This is the setting to use for most fabrics and
applications (fig. B).

When the dial is set above "N", the front feed dog will feed more fab­
rics than the back. This is because the front feed dog moves at a
greater distance than the back feed dogs. As a result, the fabric
becomes compressed or eased, as the diagram on the front cover
indicates. This can eliminate wavy seams in stretchy fabrics or those
cut on the bias grain.

At the maximum setting of 2.0 (fig. C), the differential feed can gath­
er a lightweight fabric to nearly double fullness (fig. D).
The front feed dog is actually feeding in twice as much fabric as the
back feed dog is feeding out. To maximize the gathering effects, use
the longest stitch length setting. Fabric weight will affect the gather­
ing. Test stitch for desired results.

When the differential feed lever is set below "N" (fig. F), the front feed
dog moves less distance than the back feed dog. This adjustment
stretches the fabric slightly as it is sewn. The lower settings prevent
puckers on lightweight fabric (fig. E).

A

B

D

E

F

C

★New_BLCS-2 Ta:BLCS-2 En.qxd 2009/05/25 16:58 ページ 11

Advertising