Baumatic BHI909TS.GWK - Manual (Page 16)

Switching off a zone
o
Press the cooking zone selection button of the cooking zone that
you want to switch off.
o
Press and hold down the minus button until the number in the
cooking zone indicator reaches “0”. Alternatively you can press the
plus and minus buttons simultaneously to reset the zone to “0”.
o
After a few seconds, the cooking zone will switch off.
o
A “H” and “0” symbol will flash alternatively in the cooking zone
indicator until the surface has cooled down to a safe temperature
(see the section on the “residual heat indicator” for further
information).
Switching the hob off
Once you have switched off all of the cooking zones, you should switch
the hob off.
o
Press the ON/OFF button.
o
It is possible to turn the hob off at any time by
pressing the ON/OFF button.
Residual heat indicator
o
After a zone is switched off, the corresponding
cooking zone indicator will show a letter “H” (HOT)
and “0” (OFF) flashing alternatively. This means
that the temperature of the zone is over 60°C and
is therefore still high enough to cause injury.
o
IMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Care should be taken in case the surface
temperature is still high.
16