Baumatic BHI909TS.GWK - Manual (Page 22)

22
o
The best thickness for the bottom of the pans is 2 – 3 mm of
enamelled steel and 4 – 6 mm for stainless steel with sandwich type
bottoms.
o
If these rules are not followed, then there will be a great loss of
heat and energy. Heat not absorbed by the saucepan, will spread to
the hob, frame and surrounding cabinets.
o
Preferably cover pans with a lid to permit cooking at a lower heat.
o
Always cook vegetables and potatoes, etc. in as little water as
possible to reduce cooking times.
o
Food or liquid that has high sugar content may damage the hob top
if it comes into contact with the induction hob surface. Any spillages
should be wiped up immediately, however this may not prevent the
hob surface from becoming damaged.
o
IMPORTANT: The induction hob surface is tough; however it is not
unbreakable and can be damaged. Especially if pointed or hard
objects are allowed to fall on it with some force.
o
DO NOT USE THE HOB IF THE SURFACE BECOMES BROKEN
OR CRACKED. YOU SHOULD CONTACT THE BAUMATIC
CUSTOMER CARE DEPARTMENT IMMEDIATELY.