BECKHOFF KL6001 - Manual (Page 5)

Technical data
KL6001 5
Technical data
Technical data KL6001
Data transfer channel 2 (1/1), TxD and RxD, full duplex
Data transfer rate 9600 Baud (8N1) default, (max. 19200 Baud)
Bit distortion < 3%
Connection Spring force terminals
RS232-cable length max. 15 m
LOW signal voltage -18 V ... -3 V
HIGH signal voltage 3 V ... 18 V
Power supply via K-Bus
Electrical isolation 500 Vrms (K-Bus / signal voltage)
Data buffer 128 byte receive buffer, 16 byte transmit buffer
Bit width in the Process image I/O: 3 x 8 bits user data, 1 x 8 bits control/status (up to 5 x 8 bits user
data possible)
Configuration no address setting, configuration setting via the bus coupler or control
system
Current consumption from K-Bus 55 mA
Operating temperature 0°C ... +55°C
Storage temperature -25°C ... +85°C
Relative humidity 95%, no condensation
Vibration/shock resistance conforms to IEC 68-2-6 / IEC 68-2-27
EMC resistance Burst / ESD conforms to EN 50082 (ESD, Burst) / EN 50081
Installation position any
Type of protection IP20