BECKHOFF FB1111-014x - Manual (Page 28)

Mechanical Specification
22 FB1111 Piggyback Controller Board
7.2 Physical Connector Specification
The Board to Board connector (CON500) can be connected as well from the bottom as from the top
side of the FB1111-014X. The bottom side low profile socket is equivalent to the Samtec
(
www.samtec.com ) product with the manufacturer number CLH-126-F-D-BE-P-TR. Insertion depth
from top side is 4.7 mm, respectively 3.2 mm from bottom side. A suitable pin header for the low pro-
file socket can also be received from Samtec. The TSM series is suitable for the socket. As an exam-
ple the pin header with the part number TSM-126-02-L-DV can be used to connect the EtherCAT pig-
gyback controller board FB1111-014x.
7.3 Recommended Panel Opening
1
4
.1
17.4
2.6
RUN +5V
5.0 7.3
2
.5
4
Ø3.00
OUT IN
Figure 12: Recommended Panel Opening
In Figure 12 the dimensions of a typical panel opening is illustrated. The two ports and the LED break
throughs have to be labelled as shown in the figure.