Beurer TL 40 - Manual (Page 12)

12
10. Disposal
In the interest of protecting the environment, the unit must not be thrown out with the household
waste at the end of its service life. Dispose of the unit at a suitable local collection or recycling
point.
Dispose of the device in accordance with EC Directive 2002/96/EC – WEEE (Waste Electrical and
Electronic Equipment). If you have any questions, please contact the local authorities responsible for
waste disposal.
11. What if there are problems?
Problem Possible cause Solution
Device does not
light up
On/off button switched off Switch on the on/off button.
No electricity Connect the mains plug correctly.
No electricity The mains cable is defective. Contact
customer services or your retailer.
The fluorescent tube is not correctly inserted Insert the fluorescent tube correctly.
(For a description, see the Quick guide
“Replacing the fluorescent tube”)
Fluorescent tube has reached the end of its
service life. Fluorescent tube is defective.
Replace the fluorescent tube.
(For a description, see the Quick guide
“Replacing the fluorescent tube”)
12. Technical specifications
Dimensions (WHD) 270 x 207 x 80 mm
Weight 800 g
Lighting elements MP 45 3U 45W tubes, Daylight
Power 45 watts
Light intensity 10,000 lux (15 cm)
Radiation Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
Mains connection 220-240 V ~, 50 Hz
Operating conditions +10°C to +25°C, < 30-90% relative humidity,
700-1060 hPa ambient pressure
Storage conditions -20°C to +50°C, relative humidity < 90%,
700-1060 hPa ambient pressure
Transport conditions -20°C to +50°C, relative humidity < 90%,
700-1060 hPa ambient pressure
Product classification Protection class II, IPX0, no AP or APG, continuous operation, no
ancillary parts
Degree of efficiency of the ballast ~ 96%
Source effiency (lm/W) of the bulb 67–71 lm/W
Color temperature of tubes 6.500 Kelvin
Subject to technical modifications.
This device meets the requirements of the European Directive 93/42/EEC and 2007/47/EEC Medical Devices as
well as the Medical Devices Act.
This device complies with European Standard EN60601-1-2 and is subject to particular precautions with regard
to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere
with this unit. More details can be requested from the stated customer service address or found at the end of the
instructions for use.