Bolide SVR9000DMOB_W - Manual (Page 18)

User Manual
14
5.3.2 Record
5.3.2.1 Record Parameters 
Click [Main Menu
ÆRecordÆRec Para] to enter into the interface shown as Picture 5-10 and perform record
parameter set for each channel, including Channel name, record Enable or Disable, Package time, Mode and
Pre-record function.
5.2.2.2 Schedule
Click [Main Menu
ÆRecordÆSchedule] to enter into the interface shown as Picture 5-11.
5.2.2.3 Main Stream
Go to [Main menu
ÆRecordÆMain Stream] to enter into the interface shown as Picture 5-12.
¾ Resolution: support D1, HD1 and CIF.
¾ Frame rate: PAL: 1-25 f/s ; NTSC: 1-30 f/s.
¾ Bit rate: user could select the relative value by pull-down
menu (Defaulted value: 1024).
¾ Audio: When tick-selecting the option, system will record
video stream with audio simultaneously
[Channel] option allows you select one channel you desired.
To setup weekly schedules, tick-select the box of the record
status you want (Alarm, General, or No Record) and then click on
each box in the schedule time line that you want this method to
apply to. You can use the [Copy – To] pull-down menus and Copy
button to copy settings from one day to another day or all days.
Under the <record> menu and <search> menu, original
color stands for no record, “Red” for alarm record, “yellow” for
Motion record and “Green” for normal record.
¾ Channel: Select one channel you desire to configure
¾ Record on/off: allow you select Enable or disable
¾ Package Time ˖ allow you configure maximum time
length for recorded file(15, 30, 45 and 60 min)
¾ Pre-record: When set to “On”, the motion or I/O
triggered will support Pre-record function.
Picture 5-10
Picture 5-11
Picture 5-12