BSS Audio DPR-901II Owner's Manual - Manual (Page 2)

2
DPR-901ii
Welcome to the DPR-901ii Users Manual
ABOVE AND BELOW THRESHOLD DYNAMIC
PARAMETRIC EQUALISATION.
This manual is provided with the aim of assisting sound engineers,
producers, musicians, system installers and consultants to fully under-
stand the DPR-901ii, and to benefit from it’s maximum capability.
As opposed to most manuals, the contents can be read like a book. At
the same time, the information is structured under a series of broad
headings for easy access. So where possible within each section:
! ! ! ! ! The most immediate information appears at the head of each
section under the main title.
! ! ! ! ! As you read further into each subsequent section, more detailed,
specific information is given.
If you have any comments or questions about installing, setting-up or
using the DPR-901ii, please write to us about your application, at the
address in the warranty section.
DPR-901ii
Welcome
V1.1 9 August 1995
This equipment has been tested and found to comply with the
following European Standards for Electromagnetic Compatibility.
Emission Specification EN55013 1990 (Associated equipment)
Immunity Specification EN50082/1 1992 (RF Immunity, Fast
Transients and ESD)
Mains Disturbance EN61000/3/2 1995
For continued compliance ensure that all input and output cables are
wired with cable screen connected to pin 1 of the XLR. The input XLR pin
1 on BSS equipment is generally connected to chassis via a capacitor to
prevent ground loops whilst ensuring good emc compatibility.