BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 35)

- 35 -
PS-8810
DIGITAL SIGNAL PROCESSOR
0 dBm = 0.775 VRMS with a 600-ohm load, 0 dBV = 1 VRMS, 0
dBu = 0.775 VRMS
Balanced sources should be wired as shown below . Notice that
the shield is not connected to the chassis ground of the source if
the source is also connected to the AC ground (that is, it has a
grounded AC plug). This prevents unwanted ground loops.
Balanced Audio Input Wiring
Connections Audio
Suggested Audio
Input Gain Control
Settings
Balanced Input
Wiring