BSS Audio Prosys PS-8810 Owner's Manual - Manual (Page 50)

- 50 -
PS-8810
DIGITAL SIGNAL PROCESSOR
The DSP processing is divided between four individual DSP’s; two
for the input processing and two for the mixing and output
processing.
• DSP 0 does the processing for input channels 1 through 4
• DSP 1 takes care of 5 through 8.
• DSP 2 is responsible for output processing of Main 1 and
AUX 1 through 4
• DSP3 has Main 2 and AUX 5 through 8.
Each processing requirement is monitored by the CPU utilisation
meters and additional processing is not allowed after the DSP is
95% utilized.
To conserve CPU usage, turn off any processing on unused input
and output processing sections. Also, each output’s matrix
mixing requires about 6% processing, so solo unused outputs to
one input rather than a full mix.
Processing Functions DSP
DSP