Caple C621 - Manual (Page 4)

Page 4
C621 C721 user manual.DOC
" 2 ELECTRIC" COOKING HOB (Fig. 1.3)
Electrical insulation Class I.
Overheating surfaces protection Type Y.
1. Electrical plate Q) 145 - (1000 W - 1500 W)
2. Electrical plate 0 180 - (1500 W - 2000 W)
3. Electrical plate 1 control knob
4. Electrical plate 2 control knob
5. Power indicator light
GAS BURNERS
Gas flow to the burners is adjusted by turning the knobs
(illustrated in fig. 2.1 b) which control the safety valves.
Turning the knob so that the indicator line points to the
symbols printed on the panel achieves the following functions:
Full circle • = closed valve
Full circle = maximum aperture or flow
Full circle = minimum aperture or flow.
To light one of the gas burners, hold a flame (e.g. a match) close to
the top part of the burner, push in and turn the relative knob in an
anti-clockwise direction, pointing the knob indicator towards the
large flame symbol (i.e. max. gas flow).
To reduce the gas flow to minimum, rotate the knob further
anti-clockwise to point the indicator towards the small flame symbol.
The maximum aperture position permits rapid boiling of liquids,
whereas the minimum aperture position allows slower warming of
food or maintaining boiling conditions of liquids.
Other intermediate operating adjustments can be achieved by positioning the indicator
between the maximum and minimum aperture positions, and never between the maximum
aperture and closed positions.
N.B. When the cooker top is not being used, set the gas knobs to their closed
positions and also close the cock valve on the gas bottle or the main gas supply
line.
PUSH BUTTON ELECTRIC SPARK-LIGHTING GAS
To light one of the burners you have to push in and turn the relative knob to the maximum
aperture position (large flame symbol) and press the electric lighter button (fig. 2.2) until
the flame has been lit.
Adjust the gas valve to the desired position.