Desa E36L - Manual (Page 23)

www.desatech.com 111076-01F 3
TECHNICAL SERvICE
Figure 39 - Removing Imaging Unit
Imaging
Unit
MAINTENANCE
Continued
Note: If full replacement of imager is neces-
sary, wiring harnesses must be disconnected
and new harnesses reconnected at control
panel. For proper connection, follow wiring
diagram shown in Figure 26, page 15.
REPLACEMENT PARTS
Note: Use only original replacement parts.
This will protect your warranty coverage for
parts replaced under warranty.
PARTS UNDER WARRANTY
Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
call DESA Heating Products’ Technical Ser-
vice Department at 1-866-672-6040.
When calling DESA Heating Products, have
ready
• your name
• your address
• model and serial numbers of your firebox
• how firebox was malfunctioning
• type of gas used (propane/LP or natural
gas)
• purchase date
Usually, we will ask you to return the part to
the factory.
PARTS NOT UNDER WARRANTY
Contact authorized dealers of this product. If
they can’t supply original replacement part(s),
call DESA Heating Products at 1-866-672-6040
for referral information.
When calling DESA Heating Products, have
ready
• model number of your firebox
• the replacement part number
Note: The firebox identification label (including
model number, serial number, clearances,
etc.) is located on the right front edge of the
firebox.
You may have further questions about instal-
lation, operation or troubleshooting. If so,
contact DESA Heating Products’ Technical
Service Department at 1-866-672-6040.
When calling, please have your model and
serial numbers of your firebox ready. You can also visit DESA Heating Products’
technical services web site at
www.desatech.com.