CHIAYO ADVENTURE 800 - Manual (Page 10)

9 22
In mp3 mode and in USB mode .
If this key is pushed, PLAY mode is changed cyclically shown below.
PLAY MODE
EJECT
PROG
MUTE
POWER
ESP
FIND
PLAY ALL RANDOM REPEAT TRACK REPEAT FOLDER
REPEAT ALL RANDOM REPEAT PLAY ALL
IN CD mo de If this key is pushed,
PLAY mo de is changed cyclically shown below
PLAY ALL RANDOM REPEAT TRACK
REPEAT ALL RANDOM REPEAT PLAY ALL.
When this key is pushed, door is mo ved out.
Set to programming mo de.
When programming mo de, [stop] key is pushed then program is all cleared.
When this key is pushed during CD is playing, the set will mu te the output.
Push again, will recovery the output .
Power SW of the set .
In CDDA mo de, Press"ESP" key , The ESP display lighted and the set is
in electronic anti-shock state. The electronic anti-shock time is about 40
seconds. Press "ESP" key again, cancel the ESP function.
In MP 3 mo de : Press this key once FILE search mo de changed .
Press this key twice ALBUM search mo de changed .If press this key long
time once track is displayed .press twice ID3 TAG is displayed.
You can use these keys to select the track you want directly.
When this key is pushed , the volume will decrease by 1dB per step ,
the mi n. volume is 0dB.
When this key is pushed, the volume will increase by 1dB per step ,
the ma x. volume is 30dB.
0~10;
VOL.-
VOL.+
In stop mode:
Skip the starting play folder to previous folder during stop mode, cyclic
to the last folder if it is in the first folder.
In program entry mode:
Change the file for program select to previous folder's first file, cyclic to
the last folder if it is in the first folder.
In normal play mode:
Skip the playing file to the previous folder's first file.
FOLDER-
DOWN
ENCODE
ENCODE
option
Caution: This player does not accept 8-cm diameter CD.
To avoid
damage to the USB, remember to detach it only after switching off the
player.
User is advised to have the USB 2.0 formatted in " FAT " or " FAT 32 ".
The built-in USB 2.0 player can not be able to read the MP3 files stored
in your USB if it is not formatted by either " FAT " or " FAT-32 ".
UHF Beltpack Transmitter SM-5016
Parts & Functions
Antenna
Battery weak / audio mute indicator
Audio mute switch
Mini-XLR connector
Power ON / OFF switch
LCD display
Charging port
Cover release button
Charging contacts
Lavalier microphone
Mic clip
12
13 14
16 15
14
13
12 SET
UP
DOWN
GT
MT
15
16
GAIN setting (GT/MT)
Gain control is an adjustable design that enables user to set different output levels. GT is for
the use of instrument with high impedance, such as guitar while MT is for the use of low
impedance such as lavalier or headset microphone.
9
8
7
10
11