頁面 12 – CHIAYO ADVENTURE 800 User Manual

Page 12

Advertising
background image

11

20

4.Key control

4-1 Power key
4-2 Upper key: Upper key for track selection. Track number will move quickly when push still
for two seconds (this function will not work in MP3 mode).
4-3 Down key: Down key for track selection. Track number will move quickly when push still
for two seconds (this function will not work in MP3 mode).
4-4 REC key: Record key. Select track no. in VOC mode in advance, push REC key to record,

then push

key to stop record. If the track you want to record is occupied, the

LCD will show "

≡≡

" you must delete the content of the track before you record.

When the memory is with 30 seconds left, the LCD will start to count 30,29,28,
27.....6,5,4,3,2,1,0 You can use microphones LINE IN audio source or both
mixed source for recording source.
4-5 Play/ ll key: Play key. Select the track no. you want to play, then push PLAY key to play.
Push PLAY key during playing will pause play, then push PLAY key again to
start playing. Push STOP Key to stop play.

4-6

key: STOP key. Push the key to stop all the motions, ex.: recording, playing, track

selection..。
4-7 key(Forward): Forward key. The playing will move forward when press the key, back
to normal speed when release the key.
4-8 key(Rewind): Rewind Key. The playing will move rewind when press the key, back to
normal speed when release the key.
4-9 A-B repeat key: During playing, push this key to indicate any point as start point (A point)
and finish point(B point) on a track, the machine will repeat from A to B point
until you push the key again to release the function and continue to play.
4-10 & Repeat key: In MP3 mode during playing, push REPEAT key once to"epeat the
track" the LCD will show , and push REPEAT key twice to"repeat all the
track" , the LCD will show . Push the key at the third time to release repeat
function. The "Repeat all " function can not be used in VOC mode.

Battery installation

SQ-816/SQ-216 transmitter requires 3 pieces of " AA " size battery to operate.
Please insert the batteries according to the correct polarity as indicated. To open the
battery compartment, press and slide down the cover until it clicks and locks. Further
sliding movement will remove the cover.

Handheld Transmitter SQ-816(UHF) / SQ-216(VHF)

1. Capsule with metal grille
2. Battery normal indicator (Green)
3. Battery low indicator (Red)
4. Power on/off switch
5. Channel switch
6. Charging port

Parts & functions

Advertising