CHIAYO ADVENTURE 800 - Manual (Page 14)

13 18
9. Please use the one with cooperate specification (marks on the back of the machine).
Please turn off the power when you do not use the machine for a period of times.
* To keep stable data transmission, please do not twist the USB cable during data transmission.
* Please do not press the LCD monitor heavily, or touch it with finger or sharp articles.
* Please prevent water leak into the machine.
10 . The SD card is a very precise electronic part, please use it according to the following notice:
*To prevent taking the SD card out of the machine during data transmission.
*Do not bend, strike, drop or take apart the SD card.
*To prevent to place the SD card in a high temperature, high humidity, dusty place, or a
place full with static electricity.
*Please make sure the SD card you are using has been format.
*Make sure the write protection switch of the SD card is released when you are recording .
*Our product will process large amount of messages during recording and playing, we strongly
suggest you to use high speed SD card as extension memory card, to prevent noise, data lose
or any transmission problem.
* We have tested and approval the following brands of SD card for our machine, they are:
Toshiba SD-M51225R2W 512MB
Apacer SD 120X 1GB
Apacer SD 256MB
11. We do not guarantee the function, operation, or life of any SD card is used in our machine.
We do not also take any responsibility of indemnity for the damage of SD cards.
12. Same as other digital stock products, user must save the inner documents from time to time.
This product will not take any responsibility due to documents lost directly or indirectly
damage caused.
L N L N
Pr
es
s
Handheld Transmitter SQ-916(UHF) / SQ-316(VHF)
Battery installation
SQ-916/SQ-316 use a 9V battery for power. To change or replace the battery,
please remove the color cap first, then press the bottom of battery compartment to
release the cover as shown below.
Low Sensitivity Normal Sensitivity
Sensitivity switch
This microphone has a sensitivity switch. For close mouth singing or normal speech,
please put the switch to L ( Low ) position. For tripod-mount speech, please put the
switch to N ( Normal ) position.
1. Capsule with metal grille
2. Battery indicator
3. Sensitivity switch
4. Power on/off switch
5. Battery cover
7. Color cap
Parts & functions