Code CR3 - Manual (Page 17)

C002332_15_CR3_User_Manual 11
Save Settings
1.8.2 - CR3 as a USB Keyboard
To connect the CR3 to your host computer via USB interface:
1. Attach the USB cable to CR3 (Figure 1.14).
2. There is no need to power off the computer (Figure 1.15) Connect the USB cable to a USB port on the computer
(Figure 1.16).
3. Once properly connected, the CR3 will power on and beep.
4. Scan the below code (M049_03) for USB Keyboard Mode:
USB Keyboard Factory Reset Save Settings
5. Scan the Save Settings Code (M188_02)
Figure 1.15 Figure 1.16
Figure 1.14