Code CR3 - Manual (Page 64)

C002332_15_CR3_User_Manual 58
Save Settings
6.4 - Reader Text Commands
Enabling Reader Text Commands allows the CR3 to accept text commands via RS-232 or RF commmunication. Scan
the following codes to enable/disable reader text commands:
Reader Text Commands On Reader Text Commands Off - Default
Note: Text commands can only be sent to the reader when it is active. Refer to Reader-Host Interface Control Document
for more information.
6.3 - Erase Prefix and Suffix Settings
Scan the following codes to erase all prefix and suffix data.
Erase Prefix & Suffix Data