1 - set targeting tolerances – Code CR3 User Manual
Page 59
Advertising
C002332_15_CR3_User_Manual
53
Save Settings
5.1 - Set Targeting Tolerances
50
Most Accurate
75
100
125
1600 (Default)
150
200
400
Least Accurate
The targeting tolerance is the zone around the laser which is eligible for decoding. The values of each of the following
codes are the percent tolerance based on the size of the barcode. As the targeting tolerance becomes smaller the target-
ing laser must be more centered in the symbol being read. Conversely, as the targeting tolerance gets larger there is less
precision needed with the targeting laser. If there is more than one decodable code in the field of the, the symbol closest
to the targeting laser will be decoded.
Advertising