Code CR3 User Manual
Page 21
C002332_15_CR3_User_Manual
15
Save Settings
1.8.4.1 - Additional RS-232 (Serial) Communication Data Bit Settings
Scan the following codes to set the appropriate data bit:
7 Data Bits
8 Data Bits (Default)
1.8.4.2 - Additional RS-232 (Serial) Communication Baud Rate Settings
Scan the following codes to set the appropriate baud rate:
1200
2400
4800
9600
19200
38400
57600 (Default)
115200
1.8.4.3 - Additional RS-232 (Serial) Communication Parity Settings
Scan the following codes to set parity:
Even
Odd
None (Default)
1.8.5 - Cabled Reader - Time Out Settings
Scan one of the codes below to set the amount of time a cabled CR3 will be enumerated before entering sleep mode in
order to more quickly charge the battery:
Note: These settings will only work in versions 2098 and above.
Cabled Reader Time Out: 2 hours
Cabled Reader Time Out: Never (Default)