Comtech EF Data CDM-800 - Manual (Page 27)

CDM-800 Gateway Router Revision 1
Introduction MN-CDM800
1–7
1.3.3.2.2 Rear Panel Optional Features
The unit provides the following Data Interface for optional hardware operation:
• (1X) DB‐9M EIA‐232 connector labeled “REDUNDANCY” for interoperability with a
separately purchased Comtech EF Data CRS‐170A 1:1 Redundancy Switch for L‐Band
operation, or the CRS‐180 1:1 Redundancy Switch for 70/140 MHz operation.
M:N device redundancy support is available with the separately purchased Vipersat
Management System (VMS).
The following Power Interface Option is available from Comtech EF Data:
• 48 VDC Primary Input Power Supply with Screw‐in Fuse Holders
The following installation kits are available from Comtech EF Data:
• KT/6228‐2 4” Rear‐Mounting Support Brackets Kit
• KT/6228‐3 10” Rear‐Mounting Support Brackets Kit
Sect. 2.2.1 Installing the Optional Rear‐Mounting Support Brackets Kit