En55022 - 1997 compliance, Safety compliance, En60950 – Comtech EF Data ICS-75 User Manual

Page 9: Low voltage directive (lvd)

Advertising
background image

ICS-75 Integrated Combiner Shelf

Revision 5

Preface

MN/ICS75.IOM

vii

European Electromagnetic Compatibility (EMC) Directive





EN55022 - 1997 Compliance

This equipment meets the radio disturbance characteristic specifications for information
technology equipment as defined in EN55022.

Safety Compliance

EN60950

Applicable testing is routinely performed as a condition of manufacturing on all units to
ensure compliance with safety requirements of EN60950.This equipment meets the
Safety of Information Technology Equipment specification as defined in EN60950.

Low Voltage Directive (LVD)

The following information is applicable for the European Low Voltage Directive
(EN60950):

<HAR>

Type of power cord required for use in the European Community.

!

CAUTION: Double-pole/Neutral Fusing
ACHTUNG: Zweipolige bzw. Neutralleiter-Sicherung

International Symbols:

Symbol

Definition

Symbol

Definition

~

Alternating Current

Protective Earth /

Safety Ground

Fuse

Chassis Ground

NOTE

For additional symbols, refer to the Cautions and Warnings section
featured earlier in this Preface.

NOTE

In order to meet the European Electromagnetic Compatibility (EMC)
Directive (EN55022, EN50082-1), properly shielded cables for DATA I/O
shall be used. More specifically, these cables shall be double-shielded
from end to end, ensuring a continuous shield.

Advertising