Comtech EF Data KST-12025 - Manual (Page 75)

KST-12025 Ku-Band Satellite Terminal Redundant System Installation
Rev. 1 3–21
13. Install the appropriate O-ring between the flexible waveguide attached to port 4
of the waveguide switch and the waveguide flange on the RFT “B.”
14. Using four 6-32 x 7/8” socket head cap screws, four #6 split lockwashers, eight
#6 flat washers, and four 6-32 nuts, attach the flexible waveguide (attached to
port 4 of the waveguide switch) to the waveguide flange on the RFT “B.”
Tighten the cap screws firmly.
3.4 RSU-503L Installation
Refer to the EFData RSU-503 Redundancy Switch Unit Installation and Operation
Manual.
3.5 External Connections
Refer to Section 2.5 for external connections information.