Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 147)

MiniMAC Rack Management System SDM-300 Modem Screens
Rev. 0 6–27
6.7.2.2 Interface2 – Commands
The INTERFACE2 COMMANDS allow the user to configure:
•
ASYNC TX Overhead Baud Rate
•
ASYNC TX Communications Type
•
ASYNC RX Overhead Baud Rate
•
ASYNC RX Communications Type
•
ASYNC TX Channel Character Length
•
Transmit Data Phase
•
ASYNC RX Channel Character Length
•
Receive Data Phase
•
ASYNC TX Channel Stop Bit/s
•
CTS Delay Time
•
ASYNC RX Channel Stop Bit/s
•
IDR TX ESC Type
•
ASYNC TX Overhead Channel Parity
•
IDR RX ESC Type
•
ASYNC RX Overhead Channel Parity