Comtech EF Data MiniMAC Operation ManualOperation Manual Operation Manual - Manual (Page 68)

MiniMAC Rack Management System Other Devices
Rev. 0 9–27
9.3.3.2 Demodulator Transponder Commands
On the [PRIME DEMODULATOR CONFIGURATION] screen, status parameter fields
appear in the center and status display fields appear on the right.
To check the status of one or more demodulators:
1. Choose each DMD X field (where x is the number of the demodulator).
2. The status appears as the selected demodulator(s) are polled.
To change the active status of a demodulator:
1. In the SELECT PRIME DEMODULATOR field, type the number or use the
increase/decrease arrows to select the prime demodulator number
2. In the ACTIVE? field, choose “YES” to activate, or “NO” to deactivate the
demodulator.
3. Choose [EXECUTE] to send the status change, or [CANCEL] to abandon the
change.
Note: To return to the Switch Configuration screen, choose [CANCEL]. To return to the Switch
Control screen, choose [RETURN TO SWITCH].