Comtech EF Data SDM-2020 - Manual (Page 76)

SDM-2020 Satellite Modulator Revision 7
Front Panel Operation MN/SDM2020M.IOM
5-34
5.6.8.4 FUNCTION SELECT:UTILITY:ECL_HSSI TX
INTERFACE TYPE
ECL_HSSI TX
This status-only item displays ECL_HSSI TX or UNKNOWN. No changes can be made
from this menu. Use [
↑] or [↓]to select an interface type and press <ENTER>.
DTE STATUS
AVAILABLE
This display shows the DTE STATUS selection of either AVAILABLE or
UNAVAILABLE. Upon entry, the current status of the mode type is displayed.
1 Press [ ↑] or [↓] to select an item.
2 Press <ENTER> to execute the change.
Note: Available = TA asserted
Unavailable = TA unasserted
DTE TX-IF CNTRL
OFF
This display shows the DTE TX-IF CNTRL selection of either ON or OFF. With the ON
selection, the RF carrier is ON when TA is enabled, and the RF carrier is OFF when the
TA is disabled. Upon entry, the current status of the mode type is displayed.
1 Press [ ↑] or [↓] to select an item.
2 Press <ENTER> to execute the change.