Comtech EF Data SDM-2020 User Manual
Page 86
SDM-2020 Satellite Modulator
Revision 7
Front Panel Operation
MN/SDM2020M.IOM
5-44
LAMP TEST ??
PRESS ENTER
Use the Lamp Test function to verify the front panel indicators.
Press <ENTER> to turn on all of the front panel indicators for 3 seconds.
DISPLAY CONTRAST
LEVEL: 64
Set the contrast level of the front panel display. Level 64 is the default.
1
Press <ENTER> to change the contrast of the front panel display.
2
Press [
↑] or [↓] to increase or decrease the number at the flashing cursor from 0 to 100.
3
Press <ENTER> to execute the change.
M&C FIRMWARE
FW/NNNN-DRR
This status-only window displays the M&C module firmware version. Press <ENTER>
to display the release date of this firmware.
M&C FIRMWARE
MM/DD/YYYY
Press <CLEAR> to exit the date window.
BOOT FIRMWARE
FW/NNNN-DRR
This status-only window displays the BOOT Firmware number. Press <ENTER> to
display the release date of this firmware. Press <ENTER> again to display the firmware
version.